I think I am going to put this down for now...

Hello :o)

I have been working on this little engine for a few weeks now and its progressing along quite nicely. The problem is I have now reached a point where I need to step away for a bit and think through what, and more importantly how, to do the next bits. That plus I am feeling a little guilty for not working on Highclere so I have now packed it up, ready to move onto the next thing this weekend. Below are a few pictures showing what it looked like before it was bagged up...

One of the problems which I had to overcome was the fact the slidebars for the cylinders covered a wheelset. I got around this by drilling and tapping the chassis and bolting on the cylinder block with a single M1 screw. I still need to work out how to add the slidebar bracket to the chassis which will also need to be removable. The main problem with this bracket is although the wheels are 4mm diameter, the flanges are still oversize and therefore the wheels are bigger and the bracket cannot be fitted in its 'correct' position. The photo also shows me testing the motor fit, its a 6mm diameter motor from Nigel Lawton but I haven't figured out how to hold it in position, I am leaning towards some sort of formed Brass tube with a spring clip of some sorts. You can also see that I had to cut out the chassis around the worm because I didn't realise until I tried it that the worm is 2mm diameter, not much use when the chassis only has 1.5mm clearance between the frames! The final problem worth mentioning which I also didn't realise until they came was the fact I had ordered 1mm thick gears for the drive. Not thinking about it too much I then realised I needed to get two gears side by side within the frames. Of course now I have placed another order to get some 0.4mm thick gears...!

The above shows how the chassis looks at the moment. The wheels have been temporarily fitted so I don't loose them. It also shows how the cylinders look fitted. I am pleased with how the wheels have turned out, especially as I have made them from scratch.

And this is with the body (badly) fitted. I had to cut away the body a bit around the cylinders as the cylinders are a little bit wider than the prototype (to accommodate non scale wheels). I have noticed that I have made the cut out on this side too big (I didn't notice it on the model itself) so I might replace that bit and try again.

So thats how it looks, the size of the thing is making it a little harder than normal to build. I think I am going to do something less demanding like some more scenery.....

Julia :o)

Can I make it? I dont know....

Hello.

Ok, so this is a bit contrary to my last post where I said I was gong to focus on Highclere to get it finished but somehow things have worked out this was during the week.

In my last post I mentioned that I had upgraded the spindle on my CNC mill which now allows me to use a wider range of cutters than before. Well, one of things it has meant I could now do was to use some 0.3mm diameter milling cutters and so to try them out I produced some wheel centres as shown in my last blog post.

As you can see in the above picture I have now made some wheel rims using some free cutting steel and a wheel profile tool purchased from a guy in Germany HERE as Graham kindly posted in a previous post. These were pressed onto the centres producing a nice set of 4mm diameter driving wheels.

Next on the list of things to make were the chassis sideframes. I previously got some etched but I really wanted to make them out of something thicker plus I needed to provide some support for the motor and gears. The logical thing to do was to draw them and CNC cut another pair out of some 0.4mm thick Brass.

These were then soldered together with spacers to make a chassis a teeny 2.5mm wide. I couldnt resist it so below is a picture of how the engine looks right now...

There is still lots to do (obviously) and I am still not sure if it will actually work or even if I can build everything for it! One thing I know for sure is that its making me think hard about how to make things but more importantly I am quite enjoying the challenge. It will probably sit in a box now for a month or so until I figure out what to do next and how to do it!

Julia :o)